Questions? Give us a call @ 1 (800) 445-1472


seals group 2019 2
Engineered to prevent drawdown and increase well production in low water level and slow producing wells.

4 X 1 Lemco Seal

Part No: A04X100
Steel Type:
Available for 3" to 16" wells in mild steel or stainless steel
    Rubber folds up all the way around to make an airtight seal. This helps:
  • Control drawdown now and during future dry spells.
  • Prevent submersible pumps from sucking air.
  • Increase well production.
  • Retard corrosive buildup around pump and screen area.
  • Prevent the raising and lowering of the water level inside the well.
  • Eliminate wash down of rust and slime inside the well.
  • Contain air, dirt, sand and contamination above the seal.
  • Increase pump and system life.
  • Center and stabilize the pump.
  • Easy to install.
Case Quantity: 12


After you submit this form, a link to download a price list will be sent to you, or an Invoice will be e-mailed to you. The Invoice will include UPS Shipping charges and tracking information. If you don't have an account, you will be provided with a link to pay by credit card. Thank you!

Your information will be kept private and we won't send you any junk mail


What is the Lemco Seal made of?

The Lemco Seal is made of mild steel and pliable rubber.

What are the specs on the rubber?

The rubber is a buna synthetic rubber.

Why is the outside diameter of the seal larger than the ID of the well?

The rubber has to fold up all the way around before it will go down in the well. This is how it makes an air tight seal.

Do you offer seals in stainless steel?

Yes, we do. When you're choosing the size you want, be sure to check 'Stainless Steel' or 'Mild Steel'.

Is it hard to push the seal down into the well?

Some installers/drillers wet the well casing ahead of the seal, then put water on top of the seal to help push it down.

Is it hard to pull the seal out when the well needs repairing?

You will need some type of lifting device to pull the pump.

Will the Lemco Seal work to stop the flow in an artesian well?

It depends on how much flow there is. Some have used two or more seals in tandem to successfully stop the flow.

Do you make a 6 x 4 Lemco Seal?

No, we don't, the flange would be too narrow. Same for an 8 X 6 seal or a 3 X 1¼ seal.

Will the seal still work if it's mounted 20-30 feet above the pump?

To best control drawdown, it should be mounted as close to the pump as possible.

end faq

ups ground chart-atlanta

We Ship From Atlanta, Georgia via United Parcel Service

ups logo

FREE Ground Shipping on orders over $1,000.00


Illustration shows the rubber folding up all the way around as it enters the casing and forms an airtight seal.

sealion logo footer 2019

Credit Card Logos

We accept Credit Cards and e-Checks